Past projects at RMS Cranes

(Click images to enlarge)

Arapahoe Combined Cycle Project - Manitowoc 999 and 888 setting 300,000 lbs HRSG units. The units were picked horizontally with the 999 as the lead crane and the 888 as the tail crane. Once picked from the transporter the units were rotated into a verticle position. The 888 was then unhooked from the bottom of the HRSG unit, the unit was then swung into position and set by the 999. This procedure was repeated several times during the course of the project.

Manitowoc 999 with luffing jib attachment and Manitowoc 888 setting precast concrete for the Westin Hotel project at Avon Colorado .

Invesco Field - Krupp KMK5110 110 Ton Crane setting the Invesco Field Mile High Stadium Insignia. Two Manitowoc 888 were also used to set the poured in place concrete forms.

Wyoming Wind Power Grove GMK5175 - 175 ton crane installing windmill power generators in McFadden Wyoming

Cripple Creek Manitowoc M2250 and Manitowoc 888 setting bridge girders at the Cripple Creek Gold Mine.

Colorado Springs Two crane pick (Grove 175 and 110 ton cranes)on 100,000 lb bridge girder in Colorado Springs.

Manitowoc 999 with luffing jib attachment hoisting personnel at the Denver International Airport.

Manitowoc 888 & Grove GMK6300B picking 200,000lb tub girders on I270 & I25 highway improvement. (below)

Grove GMK5160 – 175Ton crane set up on Colorado Rockies infield, replacing main scoreboard prior to the start of the 2006 season. (above)