Welcome to the fleet!Our brand new 550 ton hydraulic crane is ready for it's first mission with RMS Crane's Wind Division. The LTM 1450-8.1 features a very long yet powerful 7-piece 279' telescopic boom. If greater height is required, a folding jib can be installed quickly, whilst a fixed jib or powerful luffing jib can also be attached. These are controlled using time-tested telematics technology. The 8-axle crane has been designed for worldwide cost-effective mobility and fast, easy setup on site.
Take a look at some recent pictures of one of our 660 ton Liebherr LR1600/2 and 160 ton Kobelco CK1600G cranes at the beginning of a wind turbine construction project. In October 2020, RMS Cranes' wind division was contracted to provide crane support for wind turbine maintenance in Wyoming. The maintenance required the 84,000 lb rotor to be removed, which is shown in this video. The work required one of our 600 ton Liebherr LTM1500 8.1 machines and a 80 ton Tadano GR800XL assist crane to tail the rotor to horizontal position on the ground. Our wind division provides all types of crane services for the the wind energy industry, with experience & capabilities on most turbine types and sizes.
Contact our Wind Division: 307-224-5010 RMS Cranes was contracted by Sure Steel Inc. to hoist and install a 750,000 lb box truss for a new airplane hanger. The tandem lift required utilization of a Manitowoc 18000 crawler crane and a Liebherr LTM1750 9.1 hydraulic all-terrain crane.
Contact us today to learn how we can support your heavy-lift projects! 
Customer: Friends of Cumbres & Toltec Scenic Railroad Inc
Site: Friends of Cumbres & Toltec Scenic Railroad Inc / 2333 Steel Dr, Colorado Springs Crane: LTM 1160 5.1 Scope: Load out a 25,000 lb historic railcar. There are only 2 left in the world and this is one of them. It took 11 years to restore to new condition and is being shipped to New Mexico to be placed inside a museum. In August 2019, RMS Cranes & RMS Rigging successfully completed the move of a 300,000 lb transformer from one side of Colorado Springs to the other. Utilizing a 200 ton Jack & Slide System, the load was trans-loaded from rail to our 6-axle Goldhofer SMPT trailer, which then needed to be trans-loaded to our Goldhofer 12-axle dual-lane trailer for crosstown transport. The haul across Colorado Springs required night travel due to the overall size and weight of the configuration. The move took approximately 7 hours to complete the 10 mile journey as a total of 18 traffic lights needed to be moved with bucket rucks and light technicians. Once the load made it to the sub station, one more trans-load to the SPMT was required before a 500 Ton hydraulic crane offloaded and completed the project.
Dual-Lane Overall Dimensions
In August 2019, RMS Cranes & RMS Rigging successfully completed the move of a 300,000 lb transformer from one side of Colorado Springs to the other. Utilizing a 200 ton Jack & Slide System, the load was trans-loaded from rail to our 6-axle Goldhofer SMPT trailer, which then needed to be trans-loaded to our Goldhofer 12-axle dual-lane trailer for crosstown transport. The haul across Colorado Springs required night travel due to the overall size and weight of the configuration. The move took approximately 7 hours to complete the 10 mile journey as a total of 18 traffic lights needed to be moved with bucket rucks and light technicians. Once the load made it to the sub station, one more trans-load to the SPMT was required before a 500 Ton hydraulic crane offloaded and completed the project.
Dual-Lane Overall Dimensions
Check back here soon to see the project on video! Block 162 ProjectDenver, CO | 2018 - 2020In August 2020, RMS Cranes finished dismantling two Potain tower cranes at Swinerton Builders project Block 162 in downtown Denver, CO. The crew had 9 days to complete the dismantle of two 460’ tall tower cranes with a total of 7 tie backs. Each set of tie backs were 70’ long and had to be removed from the finished structure. We were able to successfully remove 6 sets of tie backs from the building with the tower cranes. The MR-608 dismantled the MD-485B and then RMS & Viking RCE, climbed down and untied the MR-608 to 135’ HUH and dismantled with a 300 ton Liebherr LTM 1250 6.1 assist crane. In order to complete this task in 9 days, everything had to line up perfectly. The crew worked endless hours and the camaraderie and teamwork was impeccable.
Companies involved with the successful project duration: RMS Cranes Swinerton Builders Total Welding Posch Engineering Viking RCE (Rigging & Crane Erection) Berg Electric  Site: Lindon, CO
Crane: Liebherr LTM 1220 with 118’ jib inserts Scope of Work: Erected a 330’ Tower and Antennas |
CATEGORIES
All
ARCHIVES
April 2021
|
RSS Feed
|
1961 E. 64th Avenue
Denver, CO 80229 1.800.588.7095 1.303.794.7095 afterhours@rmscranes.com info@rmscranes.com rmscranes.com rmsrigging.com jsmobileinc.com |
|
|
|
|