In October 2020, RMS Cranes' wind division was contracted to provide crane support for wind turbine maintenance in Wyoming. The maintenance required the 84,000 lb rotor to be removed, which is shown in this video. The work required one of our 600 ton Liebherr LTM1500 8.1 machines and a 80 ton Tadano GR800XL assist crane to tail the rotor to horizontal position on the ground. Our wind division provides all types of crane services for the the wind energy industry, with experience & capabilities on most turbine types and sizes.
Contact our Wind Division: 307-224-5010 RMS Cranes was contracted by Sure Steel Inc. to hoist and install a 750,000 lb box truss for a new airplane hanger. The tandem lift required utilization of a Manitowoc 18000 crawler crane and a Liebherr LTM1750 9.1 hydraulic all-terrain crane.
Contact us today to learn how we can support your heavy-lift projects! In August 2019, RMS Cranes & RMS Rigging successfully completed the move of a 300,000 lb transformer from one side of Colorado Springs to the other. Utilizing a 200 ton Jack & Slide System, the load was trans-loaded from rail to our 6-axle Goldhofer SMPT trailer, which then needed to be trans-loaded to our Goldhofer 12-axle dual-lane trailer for crosstown transport. The haul across Colorado Springs required night travel due to the overall size and weight of the configuration. The move took approximately 7 hours to complete the 10 mile journey as a total of 18 traffic lights needed to be moved with bucket rucks and light technicians. Once the load made it to the sub station, one more trans-load to the SPMT was required before a 500 Ton hydraulic crane offloaded and completed the project.
Dual-Lane Overall Dimensions
Block 162 ProjectDenver, CO | 2018 - 2020In August 2020, RMS Cranes finished dismantling two Potain tower cranes at Swinerton Builders project Block 162 in downtown Denver, CO. The crew had 9 days to complete the dismantle of two 460’ tall tower cranes with a total of 7 tie backs. Each set of tie backs were 70’ long and had to be removed from the finished structure. We were able to successfully remove 6 sets of tie backs from the building with the tower cranes. The MR-608 dismantled the MD-485B and then RMS & Viking RCE, climbed down and untied the MR-608 to 135’ HUH and dismantled with a 300 ton Liebherr LTM 1250 6.1 assist crane. In order to complete this task in 9 days, everything had to line up perfectly. The crew worked endless hours and the camaraderie and teamwork was impeccable.
Companies involved with the successful project duration: RMS Cranes Swinerton Builders Total Welding Posch Engineering Viking RCE (Rigging & Crane Erection) Berg Electric Site: Pioneer Elementary School - Parker, CO
Crane: Liebherr LTM 1220 Scope of Work: RMS Cranes hoisted a chiller weighing 8500 lbs at 140’ radius into a shaft of the school and had to 2 line/trip the chiller into the building On March 8, 2019, a Liebherr LR 1500 crawler crane lifted a 463,000 lb demethanizer vessel at the Diamond Cryogenic Facility in Reeves County, Texas. The total lift load including deductions was approximately 491,000 lbs. Altus Midstream contracted Saulsbury Industries to build the plants and Saulsbury Industries then awarded RMS Cranes the heavy lift crane support package. In addition to the demethanizer tower lifts, RMS is handling a variety of equipment on the job including six cryogenic skids and three surge tanks. Each of those items weigh 120 US tons. Some of these lifts required offloading and strategically staging the components prior to setting the equipment, thus requiring engineering and lift planning support to safely complete the job.
Contact RMS Cranes today to see how we can help lift your next project to success! In June of 2018, RMS Cranes mobilized (2) crawler machines to Mentone, TX. We were contracted to provide crane & rigging services for the erection of (1) 348,,000 lb Demethanizer Vessel. The main lift crane utilized was a Liebherr LR1500 (550 Ton). We utilized one of our Manitowoc 999 (275 Ton) machines to assist with the lift. Subscribe to our channel for more videos!
Contact us at any time to learn how RMS Cranes can help lift your next project to success. In June of 2018, RMS Cranes was contracted to provide crane support for the decommission of a 90m Alstom Turbine at the National Wind Technology Center (NREL) in Boulder, CO. This project was completed with zero incidents, or injuries.
Lift Overview: Blade Removals (Tandem Lifts): 29,000 lbs each Hub Removal: 137,000 lbs Nacelle Removal: 210,000 lbs Tower Sections: 137,000 lbs Equipment Utilized: Liebherr LR1500 (550 ton crawler) Liebherr LTM1350 6.1 (400 ton all-terrain) Tadano GR-1000XL (100 ton rough-terrain) RMS Cranes has a wind division that specializes in wind energy projects. Call us today to discuss how RMS Cranes can lift your next project to success. This video shows drone & time lapse footage of a recent wind maintenance project in Cimarron, Kansas. In May of 2018, RMS Cranes provide crane support to remove the 145,000 lb rotor and to assist with up-tower maintenance of the main shaft & bearing. This project was completed with zero incidents, or injuries.
RMS Cranes has a wind division that specializes in wind energy projects. Call us today to discuss how RMS Cranes can lift your next project to success. |
CATEGORIES
All
ARCHIVES
March 2021
|
RMS CRANES |
1961 E. 64th Avenue
Denver, CO 80229 1.800.588.7095 1.303.794.7095 afterhours@rmscranes.com info@rmscranes.com rmscranes.com rmsrigging.com jsmobileinc.com |
|
©
2021 RMS Cranes | All Rights Reserved